Item | Unit | Test Method | Typical values |
Melt Flow Rate (2.16kg/190°C) | g/10min | ISO 1133-1 | 7.8 |
Density | g/cm³ | ISO 1183-1 | 0.958 |
Tensile Modulus | Mpa | ISO 527-1, -2 | 1350 |
Tensile Stress at Yield | Mpa | ISO 527-1, -2 | 28 |
Tensile Strain at Yield | % | ISO 527-1, -2 | 7 |
Charpy Impact Strength - Notched, (-30 °C, Type 1, Edgewise, Notch A) | kJ/㎡ | ISO 179 | 6.5 |
Tensile Impact Strength Note: notched, -30°C | kJ/㎡ | ISO 8256 | 75 |
Shore Hardness, (Shore D) | ISO 868 | 64 | |
Ball Indentation Hardness (H 132/30) | Mpa | ISO 2039-1 | 60 |